GE G30 - Volts Per Hertz; Restricted Ground Fault; Transducer Inputs and Outputs

GE Multilin G30 Generator Protection System 6-25
6 ACTUAL VALUES 6.3 METERING
6
6.3.12 VOLTS PER HERTZ
PATH: ACTUAL VALUES  METERING  VOLTS PER HERTZ 1(2)
The volts per hertz actual values are displayed in this menu.
6.3.13 RESTRICTED GROUND FAULT
PATH: ACTUAL VALUES  METERING  RESTRICTED GROUND FAULT CURRENTS  RESTRICTED GROUND FAULT 1(4)
The differential and restraint current values for the restricted ground fault element are displayed in this menu.
6.3.14 TRANSDUCER INPUTS AND OUTPUTS
PATH: ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
 VOLTS PER HERTZ 1

VOLTS PER HERTZ 1:
0.000 pu
 RESTRICTED
 GROUND FAULT 1
RGF 1 DIFF Igd:
0.000 A
MESSAGE
RGF 1 RESTR Igr:
0.000 A
 DCMA INPUT xx

DCMA INPUT xx
0.000 mA
 RTD INPUT xx

RTD INPUT xx
-50 °C