English
- 11 -
User manual
P3 program
This program sets switch on at sunset
and switch off at dawn, with a night-time
interruption in which the relay is temporarily
in the off position.
P4 program
This program sets switch on at sunset
and switch off during the night, at a
programmable time (before dawn).
P5 program
This program sets switch on at a
programmable time (after sunset) and
switch off at dawn.
P6 program
This program sets an on impulse during
the night with programmable initial time
and duration of the impulse. The impulse’s
maximum duration is 59 seconds.
Note: the relay 2 has a program set to P1 (it cannot be modified).
The selection of the night-time behaviour is therefore only limited
to relay 1.
Note: the dawn and sunset times are automatically calculated
by the instrument on the basis of the astronomical coordinates
entered and of any time adjustments (see chapter “Settings”).
To Next Page
Loading...
Need help?
General
