GE GLX+Q 1 1COM 16A 2M AST IR User Manual

English
- 12 -
User manual
AUTOMATIC OPERATION
The default settings are the following:
• GLX+Q 1 1COM 16A 2M AST IR:
- Program P1 (unchangeable)
• GLX+Q 1 2COM 16A 2M AST IR:
- program P1 on relay 1
- program P1 on relay 2 (unchangeable)
The “NIGHT PROGRAM C1” menu allows you to program the behaviour
of relay 1, by assigning a different program for each day of the week.
1.1 NIGHT C1 display
From the normal operating status:
➢ Press key “
”
➢ Select PROGRAM with “C1” and “C2”
and confirm with “Ok”
➢ Select NIGHT PROGRAM C1 with “C1”
and “C2” and confirm with “Ok”
➢ The display shows the set program for
the first night of the week (in the P1
example in the night between
days 1 and 2, i.e. between Monday
and Tuesday). Press “C1” and “C2”
to cycle through the nights of the week
and display which program is set for
each night
Note: the display of the P3 program
is divided into two screen shots, the
first one showing the switch off time
and the second time the switch back
on time.
The “holiday” menu allows you to enter
individual days or holiday periods during
which all the set programmes shall not be
carried out and the relay shall be in the
off position.
1. NIGHT PROGRAM C1 menu
With this menu it is possible to view and
change the programs set on relay 1.
P1
ON
OFF
Sunset
Sunrise

GE GLX+Q 1 1COM 16A 2M AST IR Specifications

General

Brand	GE
Model	GLX+Q 1 1COM 16A 2M AST IR
Category	Switch
Language	English