GE GLX+Q 1 1COM 16A 2M AST IR User Manual

English
- 19 -
User manual
The default values for the time change are:
- winter Ò summer change: last Sunday in March, 2:00 am
- summer Ò winter change: last Sunday in October 3:00 am
During normal operation, the symbol
will appear on the display
during the CET period (winter) and the symbol
will appear during
the DST period (summer).
POSITION menu
This menu is used to change the geographical coordinates (latitude,
longitude, time zone) that were set during the installation phase.
To change a parameter:
➢ Select SETTINGS POSITION
with “C1” and “C2” and press
“Ok” to confirm
➢ If Italian is set as the
language, it is possible to
select to change only the
province or make a change
using the geographical
coordinates:
C1
C2
R
Ok
C1
C2
R
Ok
- if you want to change the province, select
CAPITAL POSITION and press “Ok”. The
currently set province will be displayed:
press “Ok” to access the change mode
and select the new province with “C1”
and “C2” and confirm with “Ok”. At
this point the message
will be
displayed to indicate the change that was
made.
➢ Select the parameter
to change from among
latitude, longitude or time
zone and press “Ok” to
confirm
➢ The parameter value is
displayed:
press “Ok” to access
the change mode
➢ Set the new value with
“C1” and “C2” and
press “Ok” to confirm.
➢ The following message will appear
on the display
.
C1
C2
R
Ok
C1
C2
R
Ok
C1
C2
R
Ok
C1
C2
R
Ok

GE GLX+Q 1 1COM 16A 2M AST IR Specifications

General

Brand	GE
Model	GLX+Q 1 1COM 16A 2M AST IR
Category	Switch
Language	English