GE GLX+Q 1 1COM 16A 2M AST IR

English
- 10 -
User manual
GLX+Q 1 2COM 16A 2M AST IS is equipped with 6 pre-set programs
that allow you to program the instrument’s night behaviour.
P1 program
This program sets
switch on at sunset
and switch off at dawn.
P2 program
This program keeps the relay in the off
position throughout the night.
PRE-SET PROGRAMS (only for GLX+Q 1 2COM 16A 2M AST IR)MANUAL OPERATION
Switching on/off manually
Press the “C1” (“C2”) key briefly to
switch the output relay 1 (relay 2, if
present).
The status that is reached will be main-
tained until the next program event.
Switch lock
Activating the lock function, all switches
are ignored. The relay remains in the
status in which it was found when the
lock was set.
➢ Press and hold “C1” (“C2”) for 3
seconds to activate/deactivate the
relay 1 (relay 2, if present)
If the function is active, the following
symbol will appear
.
P1
ON
OFF
Sunset
Sunrise
P2
ON
OFF
Sunset
Sunrise