GE GLX+Q 1 1COM 16A 2M AST IR User Manual

English
- 25 -
User manual
BATTERY REPLACEMENT
The battery charge level can be checked:
- automatically by the instrument once a week
- manually, hold down the “
” key on the main page for 3 seconds.
If the battery charge level is lower than the specific threshold,
the following message will appear on the first row of the display
. In this case, replace the battery as soon as possible.
To replace the battery:
- disconnect the power supply
- remove the cover from the battery compartment, turning it
anticlockwise
- replace the battery and replace the cover, turning it clockwise
- connect the power supply
In order to retain the programming and settings, the time that passes
between removing the old battery and inserting the new one must not
exceed 60 seconds.
Use CR-2032 batteries only.
Throw away the run down batteries in
compliance with current regulations on the
disposal of harmful waste.
REFERENCE STANDARDS
Compliance with Community Directives
2014/35/EU (low voltage)
2014/30/EU (E.M.C.D.)
is declared in reference to the harmonized standard:
• EN 60730-2-7

GE GLX+Q 1 1COM 16A 2M AST IR Specifications

General

Brand	GE
Model	GLX+Q 1 1COM 16A 2M AST IR
Category	Switch
Language	English