English
- 9 -
User manual
• if a language other than Italian is
selected, the following parameters
must be entered:
- latitude
- longitude
- the time zone
(a time zone
is suggested
based on the
latitude and
longitude values;
this value may be
changed using the
“C1” and “C2”) keys
- sunrise and sunset
time corrections
(in this phase do not enter
a correction,
leave the two values
at 0 and press “Ok”)
At this point, the instrument will switch
to the normal operating status (main
Main page
page). The display will show the date,
time, relay status, day of the week (in
letters on the top row, in numbers at the
bottom) and the CET / DST symbol.
Note: if the instrument is not powered
by the mains, instead of the day the
following message will appear on the top
row
.
In this condition backlighting is not active
and the relay will remain off.
Ok
Ok
Ok
Ok
To Next Page
Loading...
