HOT LIPS TUBE SEALER Operator Manual 87-4500-07 AI 13
Introduction 1
Disclaimer 1.6
range. The portable lightweight unit has a carrying handle and can be plugged into
any 100-120/220-240 V~ power outlet making it usable anywhere in the plant or
laboratory. No compressed air or cooling water is required.
1.6 Disclaimer
The HOT LIPS TUBE SEALER has been tested to produce seals of sufficient quality
and strength. It is believed to be adequate for the intended application. Under no
circumstances can data in this manual be submitted to any regulatory agency in
support of a clinical product, without specific written permission from the
manufacturer.
The manufacturer is not liable for any loss incurred due to the use of this
equipment.
It is the responsibility of the end user to verify and validate the suitability of this
device for a specific application. Seals should be carefully inspected before use.