GE Hot Lips Tube Sealer

3 Operation
3.4 How to load the tubing
20 HOT LIPS TUBE SEALER Operator Manual 87-4500-07 AI
3.4 How to load the tubing
Precautions
WARNING
Hot surfaces of
HOT LIPS TUBE SEALER. The jaws reach over 200°C
during the heating cycle. Do not touch the jaws during operation.
WARNING
Pinch hazard when using
HOT LIPS TUBE SEALER. The jaws are moving
during clamping and calibration. Keep away from the jaws when
clamping tubes and during the calibration procedure.
WARNING
Depending on which tubes that are used, hazardous gases may emit.
Make sure to use the instrument in a room with proper ventilation.
WARNING
Before starting
HOT LIPS TUBE SEALER please make sure that no
objects/tubes are kept in between the heating jaws or moving path.
NOTICE
Leave space around the unit for proper ventilation.