GE Hot Lips Tube Sealer

HOT LIPS TUBE SEALER Operator Manual 87-4500-07 AI 31
Compatible tubing A
Appendix A Compatible tubing
Introduction
The HOT LIPS TUBE SEALER is designed to seal thermoplastic tubing.
Note: HOT LIPS TUBE SEALER cannot be used to seal silicone tubing or PTFE.
Suitability is based on typical tubing material. The user must determine suitability
of autoclaved, irradiated, or otherwise treated tubing.
Tested tubing brands
The tested tubing brands are listed in the table below. The ReadyToProcess
TM
tube
sizes are marked with an x in the table.
Note: The Tubing Brand names on the instrument screen may not look exactly the same
as in the table above. The Tubing Brand names displayed on the instrument
screen are abbreviations with the purpose to identify the tube material
Tubing dimension (I.D. x O.D. in inches)
Data ver: 0809 Date: 09/11
Tubing
brand
1/8
x
1/4
3/16
x
5/16
3/16
x
3/8
1/4
x
3/8
1/4
x
7/16
5/16
x
7/16
1/4
x
1/2
3/8
x
1/2
3/8
x
5/8
1/2
x
3/4
5/8
x
7/8
3/4
x
9/8
3/4
x
5/4
BIOPRENE
TM
++
C-FLEX
TM
082
++ ++ + +++++++
C-FLEX 374 + x + + +x +x +x x
PHARMED
TM
BPT
++ + ++
SANIPURE
TM
60
+++
SANIPURE
BDF
++++
TYGON
TM
/
PVC
+++