iBox/iBox Kit
Installation and Maintenance Guide
GE Grid Solutions
994-0047-5.10-4 GE Information
Downloading your iBox Configuration over the LAN
Introduction
Once you have configured the iBox PPP Driver and Ethernet Module, you can
download subsequent changes to the iBox configuration over the LAN. To do this,
configure your PC with an IP address in the LAN’s subnet. This is illustrated below:
iBOX Kit
Ethernet
Module
PC running
Config Pro, with IP
address in iBOX
Kit subnet
LAN
iBOX
Note: Refer to Appendix D: Setting your PC IP Address for instructions on how to
set your PC’s IP address (for Windows 2000).
To Next Page
Loading...
Need help?
General
