GE iBox User Manual

GE Grid Solutions
iBox/iBox Kit
Installation and Maintenance Guide
GE Information
994-0047-5.10-4
169
Appendix G: Error Messages
When processing an output request, the Plant I/O Subsystem (P097) DCA may not be able to execute the
request. If this occurs, the Plant I/O Subsystem DCA will set the status code returned with the request to
the appropriate error code, and negatively acknowledge (NACK) the control request. This section
describes the possible status codes returned.
Control Requests Error Codes
Error Message Description
Unsupported Point (0x0010)
Requested control point is not supported.
Unsupported Operation (0x0011)
Requested control operation is not supported for this point.
Output Not Available (0x0012)
The control output is not available for this point.
Queue Not Available (0x0013)
The control output queue is not available.
Invalid Request Parameters
(0x0014)
The control output request parameters are not valid for this control
point.
Too Much Lead Time (0x0015)
The control output request lead time is too much.
Not Enough Lag Time (0x0016)
The control output request lag time is not enough.
Window Too Small (0x0017)
Control output request time window is too small.
No Room on Queue (0x0018)
The control output request queue is full.
Not Armed (0x0019)
The control request point is not armed.
Analog Requests Error Codes
Error Message Description
Analog Output Unsupported Point (0x0010)
The analog output point is not supported.
Analog Output Not Available (0x0011)
The analog output is not available.
Online Configuration in Progress (0x0012)
Another online configuration change is in progress.
Online Configuration Invalid Type (0x0013)
Configured alarm settings do not match the alarm
type.
Online Configuration Invalid Settings (0x0014)
Configured alarm settings are out of range.
Online Configuration Alarm Not Available (0x0015)
Specified alarm number is unavailable.
Online Configuration Invalid Alarm Number
(0x0016)
Specified alarm number is out of range.
Online Configuration No Alarm Number (0x0017)
No alarm number has been submitted.
Online Configuration Cancelled (0x0018)
Configuration change is cancelled.
Online Configuration Time Out (0x0019)
Configuration change cancelled due to timeout.
Online Configuration Disabled (0x001A)
Online configuration services are disabled.
Online Configuration Change Disabled (0x001B)
Online configuration change service is disabled
Online Configuration Out of Events (0x001C)
Request rejected. Lacked WIN event buffers.

GE iBox Specifications

General

Brand	GE
Model	iBox
Category	Controller
Language	English