GE iBox - Page 72

iBox/iBox Kit
Installation and Maintenance Guide
GE Grid Solutions
72
994-0047-5.10-4 GE Information
Runtime and Startup Errors, Continued
Symptom Possible Causes Suggestions
NVRAM Check Failure System start-up fails
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Application Checksum
Failure
System start-up fails
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
BootROM Checksum
Failure
System start-up fails
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
Start-Up Failure
RAM check, NVRAM check,
Application checksum, or
BootROM checksum failed
during system start-up.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions.
System Shut Down
RAM, NVRAM, FLASH, or
BootROM internal system
diagnostics failed.
Use WESMAINT to view the error
message, and refer to related
configuration guide for
suggestions
Only the System
Monitor is Running
No valid application code
is detected.
Load application code
Code Download
Failure
Download interrupted or
data error encountered in
downloaded file.
Clear Flash EPROM memory.
Restart download procedure.
Cannot Download
Code
Logged into the
Application Monitor.
Exit Application Monitor, and
launch System Monitor.