MA-040 ā DGA 900 Plus - Operator Guide - Rev 1.1 4-Mar-22 Page 15 of 99
5.1 TMS Options
The Hub module has four PCB slots as shown in Figure 5-3. From left to right, the first
slot houses the Controller PCB as described in the standard DGA 900 Installation
manual. Depending on the chosen combination of options, the other three slots as
highlighted house the I/O cards for the additional analogue and digital inputs related to
the additional modelling and monitoring capabilities.
Figure 5-3: Hub module PCB faceplates
The four available card options are:
Thermal Models_Card_Option_#1:
Cooling Status Monitor
OLTC Monitor
Bushing Monitor
The system can host up to any three of the above four card options.
To Next Page
Loading...
