GE MAC 800

Troubleshooting
2031504-159D MAC™ 800 3-19
Frequently Asked Questions
Maintenance
NOTE
See the MAC™ 800 Operator’s Manual for complete System
Configuration information.
Save System Setups to SD Card
Q: How do I save changes I have made to the System Configuration?
A: Perform the following steps:
1. Insert the SD card into the SD card slot in right side as shown.
2. Push the SD card into the slot to seat it in place.
3. From the Main Menu, press F4 to select System Configuration.
4. Press F6 (More) > F6 (More) > F3 to select Export Setup.
5. Highlight the setup file you want to save to SD card from the list on
left side of the window.
6. Press F1 to select Export.
The following window opens.