3–10 MM200 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
GRAPHICAL CONTROL PANEL CHAPTER 3: CONTROL PANEL
Actual values pages The actual values pages are divided into three sections for the MM200.
• Summary (overview of primary actual values)
• Amps (metered current values)
• Sensor (metered temperature and thermistor values)
The actual values summary page displays a summary of the analog actual values. The
current and sensor actual values pages are accessible from the summary page through
the corresponding soft-keys at the bottom of the screen.
Some typical actual values screens are shown below.
Figure 3-9: Typical actual values current page
Status pages The status pages shown provide the user with up-to-date information on the current status
of the MM200.
Status pages are divided into four sections.
• Message (displays all locked out conditions plus conditions such as alarms, internal
faults, control status, etc.).
• Inputs (displays the present state of assigned contact inputs).
• Outputs (displays the present state of assigned contact outputs).
• System (displays the present state of the communications interface).
A typical display is shown below:
Figure 3-10: Typical status message page
Message types are classified by color and associated icon type, as follows::
• Red Triangle = Trip
• Orange Square = Alarm
• Blue Circle = Inhibit
To Next Page
Loading...
