April 2004
3-18 Advanced Programming
Viewing the Data Logger
Status
Press the keys as shown in Table 3-7. The screen appears similar to
Figure 3-7 below. Figure 3-18 on page 3-31 for a menu map. Log
statuses include running, stopped, pending (waiting to start) or
finished. The screen also displays whether internal or extra (PCMCIA
card) memory is in use, as well as the amount of memory available.
Figure 3-11: The Data Logger Menu
Viewing Logged Data To view a specific file from the Data Logger Menu, move the pointer
to that file, and then press [YES]. The screen appears similar to
Figure 3-11 above. Figure 3-18 on page 3-31 for a menu map.
Use the PREV and NEXT menu keys to view the next and previous
pages of logged data. To view other records, continue to press the
NEXT menu key until <end> appears at the end of the record. If the
screen has more than three columns, use the pointer to scroll across
the columns.
To exit, press the DONE menu key until Main Menu appears on the
message line.
Removing Logged Data To remove a log, select it with the arrow keys on the Data Logger
Menu. Press the [FILE] menu key, and then [REMOVE]. The screen
will ask “Are you sure?” Confirm the deletion by pressing [YES].
IMPORTANT: Deleted logs cannot
be retrieved!
Table 3-7: Entering the Data Logger Menu
Press the Main Menu key: To enter the:
OPTIONS Option Menu
LOGGER Data Logger Menu
Data Logger Menu 15:16 06/15/99
HELP NEXT PREV DONE
TUES.LOG VIEWING 06/15/00
TIME 1:User 1 1:DP/°C 1:FH
12:15:22 -4.8 +15.3 163.590
12:15:32 -4.7 +15.3 163.600
12:15:42 -4.8 +15.3 163.610
12:15:52 -4.6 +15.3 163.600
12:16:02 -4.7 +15.3 163.620
To Next Page
Loading...
