H-4 N60 Network Stability and Synchrophasor Measurement System GE Multilin
H.1 CHANGE NOTES APPENDIX H
H
5-82 5-87 Add Added Figure 5-29 Example Of Aggregator Data Sets
5-82 5-88 Add Added Figure 5-30 CFG-2 Based Configuration Solution
5-82 5-87 Add Added examples for a syncrophasor dataset and the creation of different datasets
5-82 5-88 Add Added example for a CFG-2 based configuration
5-82 5-88 Remove Removed aggregator menu from the PMU 1 menu
5-83 5-90 Update Updated PMU 1 basic configuration menu to add 37.118 and 90-5 configuration settings
submenus
5-83 5-89 Add Added PMU 1 configuration menus for 37.118 and 90-5 with settings descriptions
5-84 5-90 Update Changed PMU 1 Function setting description
5-87 5-93 Remove Removed aggregators section with the PMU 1 aggregators menu and setting descriptions
5-88 5-103 Add Added 37.118 AGGR 1 configuration menu and setting descriptions
5-97 5-101 Add Added new aggregators section with PMU 1 aggregators menu and setting descriptions
5-97 5-101 Update Updated PMU 1 aggregators menu to include 37.118 and 90-5 aggregator configuration
submenus
5-97 5-101 Add Added 90-5 AGGR 1 configuration menu and setting descriptions
5-97 5-101 Add Added Table 5-11 # Of ASDUs
5-97 5-103 Add Added new control block section with IEC 90-5 MSVCB configuration menu and setting
descriptions
5-117 5-124 Update Added row for DeltaTime to Table 5-: FlexElement Base Units
5-174 5-174 Delete Deleted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
5-197 5-197 Add Added new CyberSentry security section and main menu, local passwords, session settings,
restore defaults, and supervisory subsections to Chapter 5
6-1 6-1 Update Update Actual Values main menu to include Real Time Clock Synchronization submenu
6- 6-8 Add Added new section for Real Time Clock synchronizing consisting of the menu of settings and the
setting descriptions
6-11 6-11 Delete Deleted section 6.2.19 Ethernet Switch
6- 6-11 Add Added new section 6.2.20 Remaining Connection Status
7-1 7-1 Add Added Security command to the Commands main menu
7-3 7-3 Add Added Reboot Relay command and description to the Relay Maintenance menu items
7- 7-5 Add Added Security menu and submenu commands and descriptions to the Command menu
7-9 7-9 Add Added to Minor self-test error message **Bad PTP Signal**
8- 8-4 Add Added new section for CyberSentry software option with overview and security menu subsections
A-14 A-14 Add Added Flexanalog item PTP–IRIG-B Delta to Table A-1: Flexanalog Data Items
B-8 B-8 Update Updated Modbus memory map table to include port 0 for Modbus slave address, TCP, DNP,
HTTP, TFTP, MMS, and removed references to COM 1 RS485 port
C-23 C-23 Update Updated tables in sections C.6.3 ACSI Services Conformance Statement and C.7.1 Logical
Nodes Table
Table H–6: MAJOR UPDATES FOR N60 MANUAL REVISION Y1 (Sheet 2 of 2)
PAGE
(X2)
PAGE
(Y1)
CHANGE DESCRIPTION
To Next Page
Loading...
