GE NetworX Series Installation And Setup Manual

NX-148E LCD Code Pad Installation and Setup Manual
24
12. Specifications
Operating Power 12 VDC Regulated
Operating Temperature –7 to 49 degrees Celsius
Current Draw 110 mA maximum
75 mA without Sounder
LCD Code Pad Dimensions (W) 162.56 mm
(H) 134.62 mm
(D) 25.4 mm
Shipping Weight 0.91grams
When installed as directed, this product conforms to
the standards set by Standards Australia on
behalf of the Australian Communications Authority
(ACA).
GE Interlogix Australia
646 Whitehorse Rd
Mitcham, Victoria, 3132
Tel. (03) 9259 4700
Fax. (03) 9259 4799
www.gesecurity.com.au
NX is distributed in Australia and New Zealand by:
NSW (DAS) -
Alexandria
VIC (DAS) -
Coburg
SA (DAS) -
Edwardstown
Tel: (02) 9698 9698 Tel: (03) 9383 2066 Tel: (08) 8375 9900
NSW (DAS) -
GranviIle
ACT (DAS) -
Fyshwick
QLD (DAS) -
Bowen Hills
WA (DAS) -
Balcatta
Tel: (02) 9897 7722 Tel: (02) 6280 9630 Tel: (02) 3252 5512 Tel: (08) 9240 4420
NSW (DAS) -
Chatswood
VIC (DAS) -
Rowville
QLD (DAS) -
Ashmore
TAS (DAS) -
Hobart
Tel: (02) 8467 1467 Tel: (03) 9755 6922 Tel: (07) 5597 7203 Tel: (03) 6234 9455
Auckland (Hills) Wellington (Hills) Christchurch (Hills) Albany (Hills)
(09) 5258007 Tel: (04) 9399355 Tel: (03) 3746277 Tel: (09) 5258007
NX-148E Installation Manual
NX148EIB04_AUS REV. B (Oct 2004)

GE NetworX Series Specifications

General

Model	NetworX Series
Zones	Varies by model (e.g., 8, 16, 32, 64)
Partitions	Varies by model (typically 1-8)
Keypads	Supports multiple keypads
Communication	Phone line, cellular, IP
Power Supply	16.5 VAC
Backup Battery	12VDC, 7AH
User Codes	Varies by model (e.g., 48, 150, 300)
Event Buffer	Varies by model (e.g., 200, 500, 1000 events)
Operating Temperature	0°C to 49°C (32°F to 120°F)
Communication Protocol	Contact ID, SIA
Weight	Varies by model
Dimensions	Varies by model (e.g., 14.5" x 12.5" x 3.5")