ā 20 ā
Demo Mode
In demo mode, the only components that will function are the control LEDs. No other components will
operate. The countdown display will run much faster than normal.
To Enter Demo Mode To Exit Demo Mode
1. Turn off the unit.
1. Unplug the washer.
2. Open the door.
3. Wait 30 seconds.
4. Restore power to washer.
5. Press START/PAUSE 4 times within 30 seconds
of applying power.
Use same procedure as entering demo mode.
Note: Removing power from washer will not exit
demo mode.
To Next Page
Loading...
