– 7 –
Control Features
(Continued Next Page)
About the washer control panel.
You can locate your model number on a label on the side of the washer.
Power
Press to “wake up” the display. If the display is active, press to put the washer into standby mode.
NOTE: Pressing POWER does not disconnect the appliance from the power supply.
1
WARNING! To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating this appliance.
2
1
3
4
5
6
10
7
8
9
11
14
16
13
12
PFWS4600, PFWS4605 – Profile HA Steam Washer w/ SmartDispense
™
PFWH4400, PFWS4405 – Profile HA Washer w/o Steam, w/ SmartDispense
™
Quick Start
If the screen is dark, press the POWER button to “wake up”
the display.
1
Press the
POWER
button.
2
Select a wash cycle
or Steam Refresh cycle.
(Defaults are set for each cycle.
These default settings can be
changed. See Control settings
for more information.)
3
If you selected a cycle other
than the SPECIALTY CYCLE,
press the START/PAUSE button.
If you selected SPECIALTY CYCLE, choose between Rinse
and Spin, Garments, Bed and Bath, and Other Specialty
for your specific needs before pressing START/PAUSE. Se
specialty cycles for more information."
2
1
3
4
5
6
10
8
7
13
11
14
16
17
9
12
15
To Next Page
Loading...
