ā 50 ā
6. Remove the 2 Phillips-head screws that attach
the protect cover and ring to the door frame.
7. Lift and remove the protect cover and ring.
Note: The door handle and door frame are replaced
as an assembly (Part # WH46X10210).
Door Handle
Door Frame
Protect Cover
Ring
3. Remove the 5 Phillips-head screws that hold the
door hinge to the front panel.
Door Hinge
To remove the door hinge:
1. Remove the door. (See Door.)
2. Use a 3/16-in. pin punch to drive the hinge pin
out of the door hinge bracket. Remove the door
hinge bracket.
Hinge Pin
Door Hinge Bracket
Door Hinge
(Continued Next Page)
To Next Page
Loading...
