– 59 –
Test Mode Selection Description
14. Dispenser Test
Verifi es the dispenser motor works and can locate
all 4 dispenser positions.
15. Bulk Pumps Test Verifi es all the Smart Dispenser Pumps work.
16. Bulk Sensors Test
Verifi es all the Smart Dispenser Sensors work.
17. Auto Spin Profi le Tests each spin speed of the washer. Note: No
out-of-balance detection will be performed here,
so the washer will spin up regardless of any out-of-
balance condition in the drum.
18. Bulk Manual Priming Manually initiates the priming of the Smart
Dispenser pumps.
19. Bulk Primed Status Checks the control status of the prime status of the
pumps and allows the user to change/reset the
prime status.
20. Steam Tumbles while operating the steam generator.
To Next Page
Loading...
