4–22 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 4: SOFTWARE
Z Enter the desired site name in the Site Name field.
If desired, a short description of site can also be entered along with the
display order of devices defined for the site.
Z Click the OK button when complete.
The new site will appear in the upper-left list in the EnerVista PQMII
Setup Software window.
Z Click the Add Device button to define the new device.
Z Enter the desired name in the Device Name field and a description
(optional) of the site.
Z Select the appropriate communications interface (Ethernet or Serial) and
fill in the required information for the PQMII.
FIGURE 4–8: Device Setup Screen (Example)
Z Click the Read Order Code button to connect to the PQMII device and
upload the order code.
If a communications error occurs, ensure that communications values
entered in the previous step correspond to the relay setting values.
Z Click OK when complete.
Z From the EnerVista main window, select the IED Dashboard item to
open the Plug and Play IED dashboard.
An icon for the PQMII will be shown.
To Next Page
Loading...
