Chapter 2. Getting Started
GFK-2847 QuickPanel+ User’s Manual–November 2013 13
2.3.2 Initial Configuration
When you first start up the QuickPanel+, a few configuration steps are necessary.
1. Tap Start , point to Settings and then tap Control Panel.
2. In the Control Panel, double-tap Date and Time to configure the system clock.
3. In the Control Panel, double-tap System to configure a network Device Name. Many
applications, including Proficy Historian require a unique Device Name. It is recommended
procedure to set a unique Device Name for the QuickPanel+ to avoid future conflicts.
4. In the Control Panel, double-tap Network and Dial-up Connections to configure network
settings.
5. To save the settings, run Backup.
2.4 Runtime Setup
To download an application to a QuickPanel+ unit, you must set up a data link between it and
your development workstation. For more information, see 4.6.2, “Ethernet.”
“Downloading a Machine Edition Project” in the Machine Edition online help.
2.5 Firmware Updates
Updates to the QuickPanel firmware are available on the Support web site. This allows you to
update the unit to the most recent released version of the firmware with the latest feature
updates and issues addressed.
2.6 Shutdown
There are no specific dangers associated with a power failure or other unplanned shutdown
of the QuickPanel+. In general, programs are retained in flash memory and user data can be
To Next Page
Loading...
Need help?
General
