GE RSTi-EP - Leds

Chapter 7. Detailed Descriptions of EP-19xx Modules
26 RSTi-EP Functional Safety Manual GFK-2956A
Caution
Risk of material damage - In the case of a maximum power supply of 8 A and
a maximum temperature of +140 °F (+60°C), all wired contacts on the fourth
connector must be connected with 1.5 mm² wiring.
5.4.1 LEDs
LED Indicators EP-1902
Module
Status
Green: Communication over the system bus
1.1
Yellow: Safety circuit 0 OK
1.2
--
1.3
--
1.4
--
2.1
Yellow: Safety circuit 1 OK
2.2
--
2.3
--
2.4
--
3.1
--
3.2
--
3.3
--
3.4
--
4.1
--
4.2
Yellow: 24 V Safe output active
4.3
Green: Feed-in voltage in valid range
4.4
--
For error messages, refer to the Chapter, LED Indicators and Troubleshooting.