Security Pro 500
25
The time allowed to leave the premises after arming the system is the Exit Delay time.
Paging
For what events will the central station or pagers be notified?
Is the Streamlining feature enabled?
• Yes. When the system pages me, the message will not include the central station account
number.
• No. All pages from my system will include the account number.
• According to my pager provider, the central station account number will appear as:
___________________________________________________________________
Door Door Location Entry Delay Exit Delay
1
2
3
4
5
Feature My system features include:
Quick Arm
• Yes. Press the arming level desired.
• No. Enter arming level, then access code.
Quick Exit
• Yes. Press D and exit your armed premises through a delay door within 2 min-
utes.
• No. I need to disarm my system in order to exit the premises.
Exit Exten-
sion
• Yes. If I reenter the armed premises during the Exit Delay time, the Exit Extension
will begin.
• No. If I reenter the armed premises during the Exit Delay time, it will continue to
count down and I must disarm the system.
Keyswitch
Arming
• Yes. I can use a key to arm the system. The switch is located:
_____________________________________________________________
_____________________________________________________________
•No.
Auto STAY
Arming
• Yes. If, after arming to Level 3—AWAY, I don’t exit through a designated delay
door, the system will arm to Level 2—STAY.
• No. If, after arming to Level 3—AWAY, I don’t exit through a designated delay
door, the system will continue to arm to Level 3—AWAY. And, if my system con-
tains motion detectors, movement may cause an alarm.
Reporting Features CS 1 CS 2
Pagers
1 2 3
High Level Reports
Low Level Reports
Opening/Closing
Reports
Latchkey Reports N/A N/A
To Next Page
Loading...
