Commands at a Glance
To do this: Press:
Disarm the system.
1 + Code
Disarm the system during
Entry Delay Time.
Code (or 1 + Code)
Cancel an accidental alarm. Code (or 1 + Code)
Arm to Level 2—STAY. 2 + Code
Arm to Level 3—AWAY. 3 + Code
Send a police alarm. Press and hold both POLICE
buttons for 2 seconds.
Send an auxiliary alarm. Press and hold both AUXILIARY
buttons for 2 seconds.
Send a fire alarm. Press and hold both FIRE
buttons for 2 seconds.
Arm system with No Delay.
2 + Code + 4 or
3 + Code + 4
Arm system to send a
Latchkey page.
2 + Code + 6 or
3 + Code + 6
Bypass a sensor. Indirectly: 2 + Code + ƒ or
3 + Code + ƒ
Directly: ƒ + Code + Sensor Number
Arm system silently.
5 + 2 + Code or
5 + 3 + Code
Check the system status.
‚
Turn Chime on/off. 7 + 1
Check alarm memory. 7 + 6
Initiate a phone test. 8 + Code + 2
Initiate a sensor test. 8 + Code + 3
To Next Page
Loading...
