GE Security Pro 500 - Using Programming Shortcuts; Programming Shortcuts Overview; Shortcuts for User Codes and Time;Date

Security Pro 500
32
Using Programming Shortcuts
A programming shortcut is a number that gets you to a particular spot in the programming
menus. A series of shortcut numbers takes you directly to the feature or code you want to change.
The table below lists:
1. How to enter the programming menus.
2. User programming tasks.
3. The sequence of keystrokes to take you to the task.
4. Specific information to enter for the task.
5. How to accept an entry.
6. How to exit the programming menus.
1. Enter
programming
menus:
2.Choose programming
task.
3. Enter ‚+‚,
then key
sequence.
4.Enter value or
choice.
5. Secure
choice.
6. Exit
programming
menus.
9 + Master Code
Set system time 0 0 Time in 24-hour format
(Enter 4 digits)
ƒ ‚ + 4 + ƒ
Set system date 0 1 Enter 6-digit date in
mm/dd/yy format
Change User code 00 1 0 0 0 0 4-digit code
Direct Bypassing for User 00 1 0 0 0 1
1 (Off) or 2 (On)
System Tests for User 00 1 0 0 0 2
Change User code 01 1 0 0 1 0 4-digit code
Direct Bypassing for User 01 1 0 0 1 1
1 (Off) or 2 (On)
System Tests for User 01 1 0 0 1 2
Change User code 02 1 0 0 2 0 4-digit code
Direct Bypassing for User 02 1 0 0 2 1
1 (Off) or 2 (On)
System Tests for User 02 1 0 0 2 2
Change User code 03 1 0 0 3 0 4-digit code
Direct Bypassing for User 03 1 0 0 3 1
1 (Off) or 2 (On)
System Tests for User 03 1 0 0 3 2
Change User code 04 1 0 0 4 0 4-digit code
Direct Bypassing for User 04 1 0 0 4 1
1 (Off) or 2 (On)
System Tests for User 04 1 0 0 4 2
Change User code 05 1 0 0 5 0 4-digit code
Direct Bypassing for User 05 1 0 0 5 1
1 (Off) or 2 (On)
System Tests for User 05 1 0 0 5 2
Change User code 06 1 0 0 6 0 4-digit code
Direct Bypassing for User 06 1 0 0 6 1
1 (Off) or 2 (On)
System Tests for User 06 1 0 0 6 2
Change User code 07 1 0 0 7 0 4-digit code
Direct Bypassing for User 07 1 0 0 7 1
1 (Off) or 2 (On)
System Tests for User 07 1 0 0 7 2