GE Security Pro 500 - Appendix C: Programming Your System - Menu Options; Example: Erasing User Codes; Programming Menu Flowchart and Options

Security Pro 500
31
Programming Menus
BB
B
B BB
B
B
ƒ
ƒ‚
ƒ‚ ƒ‚ƒ‚
B
B B
ƒ
ƒ
At a touchpad, press
9
Enter the System Master code.
System displays briefly:
Press to
return to the start of the
Programming Menu.
B
Press to move forward in the menu.
B
Press to move backward in the menu.
B A
A
ƒ
‚
Press to back out of the menu.
Press to enter the menu.
‚ ƒ
Press to turn a feature off.
1
Press to turn a feature on.
2
System displays:
Then, system displays:
Silent Arming When feature is on: Status beeps while arming will be silent.
Chime On Close When feature is on and Chime is turned on ( + ): 2 beeps sound when a protected door or window is opened. 1 beep sounds when the door or window is closed again.
Downloading When feature is on: Allows dealer to make changes to the system from off-site.
System Tests A user attribute that, when
on
, allows the
user to enter test mode by pressing: +
code
+
(Phone Test) +
code
+
(Sensor Test)
Direct Bypassing A user attribute that, when
on
, allows the
user to bypass sensors directly by pressing: +
code
+
sensor number
2
Press + for
next User Code.
Continue to press
for User Codes.
B
ƒ
ƒ‚
‚B
Press + for
next User Code.
‚B
Press + for
next User Code.
‚B
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
ƒ‚
+ for Low
1ƒ
+ for Medium
2ƒ
+ for High
ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
1ƒ
+ for On
2ƒ
+ for Off
0ƒ
C h i m e
BBBB
B
Press to
return to Reg Code 00.
B
8642G71B.DSF
(Chime On Close)
(Touchpad Brightness)(Silent Arming)(Downloading)
3
(Regular User Codes) (System Master Code)
(Direct Bypassing) (System Tests)
E n t e r c o d e
ƒ
8
71
S y s t e m i s O K
38
B
B
Note:
Silent Arming
may be disabled
by your installer