GE Senographe DS Operator's Manual

GE Healthcare Senographe DS Acquisition System
Revision 1 Operator Manual 5307907-3-S-1EN
Browser
8-browser.fm Page no. 77 Chapter 8
Quality Check
Aim of the Quality Check feature
The Quality Check feature requires the user to apply a qualification level to each image. This qualifica-
tion level is:
• Used to trigger Auto Push and/or Auto Print
• Used to generate image quality statistics over a given period of time (Repeat and Reject Analysis or
RRA)
How to configure Quality Check
Initial decision: Do you need the RRA feature?
The RRA feature provides an alternative (and automated) method to the manual Repeat Analysis
method described in the Senographe DS QC Manual.
It is mainly intended for sites that follow MQSA regulations. For such sites, it is mandatory to perform a
repeat analysis at least quarterly.
It is also useful for other sites to generate and keep statistics on total repeat and reject rates, as well as
their respective reasons.
Case 1: RRA enabled
If you need the RRA feature, click Yes in the Enable Repeat and Reject Analysis module, then select the
cases for which you wish to make use of the Auto Print and Auto Push features.
Note:
Once RRA is enabled, the Default image quality check is set to OK and cannot be modified.
Case 2: RRA disabled Case 1: RRA enabled
Save Close
Default image quality check
OK
NOT OK
Enable Repeat and Reject Analysis
Auto Push Repeated images?
Yes
No
Auto Push Rejected images?
Auto Print Repeated images?
Auto Print Rejected images?
Auto Push Auto Print Annotations Auto Windowing Quality Check Auto Delete Test Hosts Names Image Process.
MedAppPrefs
Yes
No
Yes
No
Yes
No
Yes
No
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Senographe DS Specifications

General

Brand	GE
Model	Senographe DS
Category	Medical Equipment
Language	English