GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx
User Manual TLE Series 160 - 500 UL S2B
PRINTER SCREEN
The UPS is capable of communicating to
a serial printer, to printout disparate
information.
Please be sure to have a serial printer
with a serial RS232 interface.
This is the only printer-interface
supported by the UPS.
Baudrate
This parameter controls the baud rate
used for data transmission.
This parameter controls the parity used for data transmission.
odd / even / None can be selected.
In case “None” has been set, automatically the parameter “Data bits = 8” is used,
independently of the value of “Data Bits” set.
This parameter controls the length of the data word on the serial line during data
transmission.
Parameter not programmable.
This parameter is used to determine the communication protocol used when
printing.
Valid values are “XON” standing for the XON/XOFF protocol or “None” standing for
By using the keys MEASURES / ALARMS / PARAMETERS / ALL it is possible to print
selected data
NOTE !
Please configure your printer with the following parameters:
115200/None/8/2/None (115200 bauds/sec, no parity, 8 bits, no Handshake).
DISPLAY SCREEN
Date
You can adjust the date of the real time
clock existing in the UPS by the means
of this parameter (“mm-month, dd-day,
yyyy-year”).
The value you enter is thoroughly
checked to be a correct date in the
You can adjust the time of the real time clock existing in the UPS by means of this
The value you enter is thoroughly checked to be a correct time in the format
“HH.MM.SS”. The time is specified in AM/PM format.
This parameter allows the choice of language used to display the information.
English, German, Italian, Spanish, French, Finnish, Polish,
Portuguese, Czech, Slovenian, Chinese, Swedish, Russian and Dutch.
The user can choose the name of the UPS model shown on the main screen (max.
20 characters).
To Next Page
Loading...
