Measurements
Venue 50 – Basic User Manual 3-33
Direction 5446729-100 English Rev. 7
GS(3 Calipers)
To make a GS(3 Calipers) measurement:
1. Press Measure, then select GS (3 Calipers).
Figure 3-27. GS (3 Calipers) Screen
2. Touch the screen, and two active calipers display.
3. Move the calipers to the desired position.
4. Press Set and the first distance value appears in the Results
Window.
5. Repeat Step 1-4 twice and the system displays the GS
value in the Results Window.
Figure 3-28. GS (3 Calipers) Measurement
To Next Page
Loading...
