GE Venue 50 - Antero-Postero Trunk Diameter by Transverse Trunk Diameter (Axt)

Measurements
Venue 50 – Basic User Manual 3-39
Direction 5446729-100 English Rev. 7
Antero-Postero Trunk Diameter by Transverse Trunk Diameter (AxT)
Make two distance measurements, one of the antero-postero
trunk diameter and one of the transverse trunk diameter.
1. Press Measure, then select AxT.
Figure 3-39. AxT Screen
2. Make a distance measurement of the antero-postero trunk
diameter (APTD).
a. Touch the screen, and two active calipers display.
b. Move the calipers to the desired position.
c. Press Set.
The system displays the distance value in the Results
Window.
3. Make a distance measurement of the transverse trunk
diameter (TTD), repeat steps a-c above.
The system displays the AxT value in the Results Window.
Figure 3-40. AxT Measurement