What to do if my GE Medical Equipment system can’t work with battery only?
If your system can’t work with the battery only, here are a few things you can check: * Ensure the battery is securely connected. * Check if the battery is functioning correctly. * Consider changing the charge board if there is a charger block issue.
General| Power Requirements | 100-240 V AC, 50/60 Hz |
|---|---|
| Image Storage | Internal hard drive, USB storage |
| Display Type | LCD |
| Imaging Modes | Color Doppler, Power Doppler |
| Connectivity | USB, Ethernet |
| Applications | Vascular, Abdominal, Cardiac, Musculoskeletal, Small Parts, OB/GYN |
| Probe Connectors | 3 |
| Transducer Types | Linear, Convex, Phased Array |
Outlines crucial safety precautions for operating and servicing the ultrasound system.
Highlights potentially hazardous procedures and emphasizes the importance of following instructions.
Details the necessary Lockout/Tagout procedures for energy control during servicing operations.
Details environmental and electrical requirements for ultrasound system installation and operation.
Covers facility needs, purchaser responsibilities, and recommendations for room layout.
Details the procedure for receiving and unpacking the ultrasound system and its associated components.
Outlines steps for verifying orders, physical inspection, and system settings before commencing setup.
Describes functional checks to verify product operation and aid in troubleshooting issues.
Details troubleshooting procedures for system and application levels, including common issues.
Details procedures for disassembling and re-assembling system components safely and correctly.
Details preliminary checks and essential system maintenance procedures for the ultrasound unit.
Covers various electrical safety tests, including leakage current, grounding continuity, and outlet checks.
To Next Page
