Functional checks
Venue 50 – Basic Service Manual 4-11
5447566-100 English Rev. 7
Performance Tests
Before performing the tests, please follow the steps first.
1. Connect one of the probes.
For available probes, See ‘Available probes’ on page 3-54
for more information..
See ‘Connect a probe’ on page 3-25 for more information.
2. Turn ON the scanner (if it isn’t turned on already).
B Mode Checks
Introduction
B Mode is intended to provide two dimensional images and
measurement capabilities concerning the anatomical structure
of soft tissue.
Figure 4-5. B Mode Screen
To Next Page
Loading...
