GE Venue 50 - Labeling; Probe Naming Conventions

Probes and Biopsy
5-4 Venue 50 – Basic User Manual
Direction 5446729-100 English
Rev. 7
Labeling
Each probe is labeled with the following information:
• Seller's name and manufacturer
• GE part number
• Probe serial number
• Month and year of manufacture
• Probe designation-provided on the probe grip and the top of
the connector housing, so it is easily read when mounted on
the system and is also automatically displayed on the
screen when the probe is selected.
Figure 5-2. Displayed Probe Information
1. Probe Information Location
Probe Naming Conventions
Table 5-1: Probe Naming Convention
Type Frequency Connector Type
C=Convex
L=Linear
S=Sector
“12” in probe
“12L-SC”
SC