Performing an Exam
3-46 Venue 50 – Basic User Manual
Direction 5446729-100 English
Rev. 7
Head Circumference (HC)
To make a HC (Hadlock) - Diameter measurement:
1. Press Measure, then select HC (Diameter).
Figure 3-53. HC (Diameter) Screen
2. Touch the screen, and two active calipers display.
3. Move the calipers to the desired position.
4. Press Set to get the first diameter.
5. Repeat Step 1-4 to get the second diameter.
The system displays the value in the Results Window.
Figure 3-54. HC (Diameter) Measurement
To Next Page
Loading...
