Measurements
Venue 50 – Basic User Manual 3-47
Direction 5446729-100 English Rev. 7
Head Circumference (HC) (continued)
To make a HC (Hadlock) - Ellipse measurement:
1. Press Measure, then select HC (Ellipse).
Figure 3-55. HC (Ellipse) Screen
2. Touch the screen, and three active calipers display.
3. Move the calipers to the desired position.
4. Press Set.
The system displays the value in the Results Window.
Figure 3-56. HC (Ellipse) Measurement
To Next Page
Loading...
