OB Worksheet
Venue 50 – Basic User Manual 3-65
Direction 5446729-100 English Rev. 7
OB Worksheet information (continued)
4. MM Measurement
Table 3-11: MM Measurements information
Field Description
Parameter Measurement name
Value The measured value. If more than one measurement was made for an item, the
system uses the specified method (average, last) to determine this value. AVG for
USA and Europe; LAST for Osaka, Tokyo and ASUM.
m1, m2 Up to two measurement values for each item. If you make more than two
measurements, the system uses the last two.
Method When there is more than one measurement for an item, this specifies the method
used to calculate the measurement value listed in the Value column. Choices are
AVG, MAX, MIN or LAST.
To Next Page
Loading...
