GE Venue 50 - Page 193

Image Management
Venue 50 – Basic User Manual 3-95
Direction 5446729-100 English Rev. 7
DICOM Worklist (continued)
2. Press Refresh, the patient list which meets the search
criteria in the worklist server displays.
NOTE: The Search Criteria may be configured in Utility ->
Connectivity -> DICOM.
3. Select the desired patient, press Select EM or Select, the
patient information is automatically populated.
Or
Enter Patient ID, Patient Name, Accession, Modality and/or
Date to search the patient. Press Select, the patient
information is automatically populated.
NOTE: Only when the patient is an emergency one, can the
operator press Select EM.
Figure 3-97. Search patient list in worklist server
4. Press Scan to begin an exam.