Performing an Exam
3-100 Venue 50 – Basic User Manual
Direction 5446729-100 English
Rev. 7
Spool
To monitor/control DICOM jobs, select Review -> Spool. You
can view, refresh, resend, and delete images from DICOM spool
by selecting a job, then specifying the action to be performed on
this job.
NOTE: If you find a failed job(s) in the Spool, please remove the failed
job(s) from the Spool.
Figure 3-102. Example screen of Spool
Table 3-15: Job status
Status Description
Ready The image transfer is ready.
Start The image transfer has started.
Finished The image transfer is successfully finished.
Failed Unsuccessful job attempt. Job stays in spool. Select Resend or Delete to
complete the job.
To Next Page
Loading...
