GE Venue 50 - Page 219

Utility
Venue 50 – Basic User Manual 4-17
Direction 5446729-100 English Rev. 7
Create New/Overwrite (continued)
If you have set your desired preset, it will be displayed under
Utility -> Image -> Application -> Available.
To overwrite the favorite preset:
1. Configure the parameters.
2. Press Save.
3. Press Create New/Overwrite.
4. Select the appropriate tab to be overwritten.
5. Press Overwrite.
The new preset will overwrite the original one.
To delete the favorite preset:
1. Press Create New/Overwrite.
2. Select the appropriate tab to be deleted.
3. Press Remove the remove the preset.
4. Press Save.