GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
3 - 20 Section 3-5 - Completing the setup
3-5-5 Connections on the Patient I/O panel
The Patient I/O panel is located on the front of VIVID E9 / VIVID E7.
3-5-5-1 Connect ECG
Connect the ECG cable to the ECG connector on the Patient I/O panel.
3-5-5-2 Connect Heart Microphone (Phono)
The Heart Microphone has its corresponding Phono adapter. See Section 9-19 "Physio TX Parts" on
page 9-74.
Connect the Heart Microphone via the corresponding Phono Adapter to the Phono input on the Patient
I/O panel.
3-5-5-3 Connect Pulse Pressure Transducer
Connect the Pulse Pressure Transducer via the corresponding Auxiliary/Pressure Adapter to the Patient
I/O panel. For Part Number and model information, see Section 9-19 "Physio TX Parts" on page 9-74.
Figure 3-4 Patient I/O Panel
Figure 3-5 Heart Microphone (Phono)
Figure 3-6 Pulse Pressure Transducer
1 - PHONO
2 - ECG
3 - AUX (PRESSURE/PULSE)
TY-306
AUX/PRESSURE
ADAPTER
To Next Page
Loading...
