GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
4 - 10 Section 4-2 - General procedures
4-2-2-1 Complete Power Down (cont’d)
4.) Switch off the Mains Power Circuit Breaker, located on the rear of the unit. This will cut power
distribution within the unit.
Be sure to wait with the next step until the system has finished its shut-down. Failing to do so, may
destroy data on the hard disk, making the system fail later.
Figure 4-8 Circuit Breaker located at rear of the unit
.
MAINS POWER CIRCUIT
BREAKER
To Next Page
Loading...
Need help?
General
