GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
4 - 20 Section 4-2 - General procedures
4-2-7-2 Connectivity — Dataflow
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
2.) Select Connectivity > Dataflow
3.) Record the settings for each Dataflow in use by the site.
Figure 4-19 The Dataflow screen
To Next Page
Loading...
