GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 5 - Components and functions (theory) 5 - 83
5-12-2 External peripherals
5-12-2-1 Footswitch
A three-button, wired footswich can be connected to one of the USB ports at the rear side of the
VIVID E9 / VIVID E7.
5-12-2-2 External Color Printer (Option)
A color video printer can be connected to the USB port on the rear of the VIVID E9 / VIVID E7.
5-12-2-3 USB Flash Drive (USB Flash Card) (option)
Due to the EMC requirements, only USB Flash Cards tested for use with VIVID E9 / VIVID E7 may be
used.
For a list of available USB Flash Cards, see: 9-15-6 "USB Flash Drive (UFD) for data storage" on page
9-53.
The following USB Flash Cards (USB Memory keys) have also been tested and approved for use with
Vivid E9 / Vivid 7 but are out-of-stock:
• USB Memory Key 2GB Trancend (USB 2.0)
• The following USB Flash Cards, approved for Vivid 7, may also be used on the VIVID E9 / VIVID E7,
but are not available for sale anymore:
- Kingston DataTraveler Elite 256 MB
- Sandisk Cruzer Micro 256 MB
- Twin MOS K24-256MB Mobile Disk III
- JMTek USB-Drive 256 MB
5-12-2-4 Ethernet
• Ethernet is connected to the I/O panel (BEP I/O board) on the rear of the VIVID E9 / VIVID E7.
Printers and external servers may be available via the Ethernet network.
5-12-2-5 Network printers
For more information, see: 3-6-4-3 "External Peripherals (Optional) for Connection to Ethernet (TCP/IP
Network)" on page 3-34.
TO AVOID DAMAGE OF THE CABLE, KEEP THE CABLE AWAY FROM THE WHEELS.
DISCONNECT THE FOOTSWITCH BEFORE MOVING THE SYSTEM.
To Next Page
Loading...
