GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 32 Section 8-5 - Replacing Covers and Bumpers
8-5-5-3 Foot Rest Bumper installation
Follow these steps to install the Foot Rest Bumper:
1.) Position the Foot Rest Bumper in place.
2.) Push the Foot Rest Bumper down and over the pedals.
You may need to push down the pedals to be able to place the Foot Rest Bumper.
3.) Replace the Side Covers, if they were removed.
To Next Page
Loading...
