GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 67
8-6-2-5 Disconnect the 19” LCD Monitor Cables
1.) Disconnect the two signal cables.
2.) Remove the 2 cable clips, if present.
NOTE: If you are replacing any cables, you will also need to remove 2 additional cable clips at the
bracket.
Figure 8-46 Disconnect cable clips and cables
ADDITIONAL
CABLE CLIPS,
REMOVE ONLY IF
REPLACING CABLES
CABLES
CABLE CLIPS