GE Vivid E7 - Page 399

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 83
8-6-5-2 LCD Mount Lock removal procedure
Follow these steps to remove the LCD Mount Lock:
NOTE: It is not necessary to remove the LCD Monitor or the LCD Arm.
1.) Remove the 2 screws securing the LCD Mount Lock.
2.) Remove the LCD Mount Lock.
8-6-5-3 LCD Mount Lock installation procedure
Follow these steps to install the LCD Mount Lock:
1.) Position the LCD Mount Lock.
2.) Install the 2 screws securing the LCD Mount Lock.
3.) Install the Bulkhead Cover.
Figure 8-66 Screw placement, LCD Mount Lock
LCD MOUNT LOCK
HANDLE
DO NOT
LOOSEN NUT